Native Works Gazelle 200
Native Works Gazelle 200
LURE SIZE: 200mm
MATERIAL: Wood
LURE WEIGHT: Approximately 80g (body only)
RECOMMENDED HOOK: F(4/0) R(3/0)
*Resize to your liking.
While maintaining the wide action that was its greatest feature, we have achieved a significant improvement in casting distance.
The lure can be operated manually by jerking with no tension, making use of the line slack. The farther away the lure is, the easier it is to control and the greater the action, but the closer the lure is, the more direct tension is applied, so it takes some getting used to and ingenuity to make the lure swim. If you want to pull the lure to the very edge of the water, leave it to other lures.
It is mainly used for attracting fish to eat at a slow tempo, so it may not be good when it responds well to short pitch jerks.
Please take note that:
- This handmade product might have slight difference in sizes and weights.
- Rough handling of this wood lure will cause cracks or water absorbent.
* After use, please wash with fresh water and let it dry.
* Lure might damage due to fighting situation and sharp hooks.
- As this lure is hard, please be careful and try not to drop or handle it roughly.
- Might have some slight unevenness in paints and aluminum wrinkles.
We will be pleased if you can send us any photos of your catch no matter of its sizes.
kawauchikenichi@gmail.com
---
Thank you for your patience and understanding
The picture shows a catch of 35kg by Mr H. Lure used is Napalm 220. Excessive load to the two front and back hooks will cause a split up from the wire inside the lure by the principal of lever and thus lure is broken.
Our factory uses light wood blanks for all products. We are trying to strengthen not only the outside but also the wire hole inside using special hard coating material. However, excessive effort in strengthen of lure will make the body heavier and will result in less flying distance and beautiful action. The merit of using light wood blanks will be of no meaning. Our factory emphasizes in making products using light wood blanks which bring out its best qualities in fishing and aim in producing better quality lure. We will improve our products and accept any users comments and will try to produce a more 'break proof' lure without departing from our concept of 'long distance', 'good action', 'user friendly' lure.
Please understand that lure might break by handling during the fishing, fighting situation, hooking point of the fish and etc.
Our factory are supported by your passions. We are committed to produce high quality lures to serve our fishing users.
Native-Works Wood engraver KENICHI KAWAUCHI
